ASTM's paint and related coating standards are instrumental in specifying and evaluating the physical and chemical properties of various paints and coatings that are applied to certain bulk materials to improve their surface properties. Cross-cut test. Protective paint systems When enclosed, the steel is trapped in a controlled environment and the products required for corrosion are quickly exhausted. Are you unsure if an SSPC standard exists for your project? ASTM's paint and related coating standards are instrumental in specifying and evaluating the physical and chemical properties of various paints and coatings that are applied to certain bulk materials to improve their surface properties.

© 2020 Painting Contractors Association. Key standards. PAINT/COATING MANUFACTURERS. All Rights Reserved. }; 2008-2020 SSPC: The Society for Protective Coatings, Disciplinary Action Criteria (DAC) Information, DoD-Allied Nations Technical Corrosion Conference, Training Host & Licensee Marketing Center. NOTE: To download or purchase a standard, you must either be an existing SSPC customer or register to create an account. Paint and paint-related products shall be stored and disposed of in accordance with Reference (a) and Chapter 3 of this Manual. When paint is required, SSPC emphasizes the importance of the development of a total paint system. There is no cost to create an account on SSPC.org, however there is a fee for membership if you wish to join. 10.1.1. Fire Standards and Flammability Standards, Durability of Nonmetallic Material Standards, Electrical Standards and Magnetic Conductor Standards, Environmental Assessment Standards and Risk Management Standards, Industrial Hygiene Standards and Safety Standards, Medical Device Standards and Implant Standards, Medical Service Standards and Medical Equipment Standards, Nonferrous Metal Standards and Nonferrous Alloy Standards, Molecular Spectroscopy Standards and Separation Science Standards, Paint Standards and Related Coating Standards, Physical Testing Standards and Mechanical Testing Standards, Security System Standards and Pedestrian / Walkway Safety Standards, Sports Standards and Recreation Standards, Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products, Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings, Standard Practice for Testing Water Resistance of Coatings Using Water Immersion, Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood, Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates, Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus, Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products, Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity, Standard Practice for Detergent Resistance of Organic Finishes, Standard Practice for Determining the Effect of Overbaking on Organic Coatings, Standard Test Methods for Evaluating Coatings For High Temperature Service, Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal, Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings, Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products, Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings, Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation, Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings, Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings, Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure, Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet), Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel, Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings, Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device, Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings, Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid), Standard Test Method for Assay of Nitric Acid, Standard Test Method for Impurities in Monoethylene Glycol by Gas Chromatography with Normalization, Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols, Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry), Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol, Standard Terminology Relating to Electroplating, Standard Practice for Design of Articles to Be Electroplated on Racks, Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases, Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces, Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces, Standard Practice for Surface Cleaning Concrete for Coating, Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application, Standard Practice for Liquid and Gelled Acid Etching of Concrete, Standard Practice for Surface Cleaning Concrete Masonry Units for Coating, Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces, Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method, Standard Test Method for Indicating Oil or Water in Compressed Air, Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities, Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted, Standard Test Method for Package Stability of Paint, Standard Test Method for Print Resistance of Architectural Paints, Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings, Standard Test Methods for Scrub Resistance of Wall Paints, Standard Test Method for Porosity of White or Near White Paint Films by Staining, Standard Test Method for Washability Properties of Interior Architectural Coatings, Standard Guide for Testing High-Performance Interior Architectural Wall Coatings, Standard Test Method for Evaluation of Gloss or Sheen Uniformity, Standard Test Method for Leveling of Paints by Draw-Down Method, Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss, Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator, Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments, Standard Test Method for Measuring Paint Spatter Resistance During Roller Application, Standard Test Methods for Practical Washability of Organic Coatings, Standard Test Method for Blocking Resistance of Architectural Paints, Standard Test Method for Comparison of the Brush Drag of Latex Paints, Standard Test Method for Wet-to-Dry Hiding Change, Standard Guide to Testing Solvent-Borne Architectural Coatings, Standard Test Method for Hiding Power of Architectural Paints Applied by Roller, Standard Guide for Testing Water-Borne Architectural Coatings, Standard Test Method for Color Development in Tinted Latex Paints, Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood, Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings, Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption, Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings, Standard Test Method for Burnish Resistance of Latex Paints, Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents, Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate, Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings, Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films, Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films, Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation, Standard Test Method for Open Time of Latex Paints, Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions, Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment, Standard Test Method for Determining Enamel Holdout, Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings, Standard Practice for Labeling Art Materials for Chronic Health Hazards, Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints, Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials, Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints, Standard Practice for Preparing Drawdowns of Artists’ Paste Paints, Standard Specification for Artists' Watercolor Paints, Standard Specification for Artists' Acrylic Dispersion Paints, Standard Practice for Visual Determination of the Lightfastness of Art Materials by Artists and Art Technologists, Standard Test Method for Determining Extractability of Metals from Art Materials, Standard Specification for Gouache Paints, Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials, Standard Specification for Artists' Colored Pencils, Standard Specification for Acrylic Dispersion Ground, Standard Test Method for Measuring Aspiration Potential of Aerosol Products, Standard Specification for Artists’ Pastels, Standard Specification for Nitration Grade Toluene, Standard Specification for Nitration Grade Xylene, Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons, Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons, Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons, Standard Test Method for Solidification Point of Benzene, Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane, Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric], Standard Specification for Refined Benzene-535, Standard Specification for Refined Benzene-545, Standard Specification for Cyclohexane 999, Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock, Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography, Standard Specification for Benzene for Cyclohexane Feedstock, Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration, Standard Specification for Benzene for Use with Zeolite Based Catalysts, Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene, Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard), Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration, Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number, Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number), Standard Specification for Disproportionation (TDP) Toluene, Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale), Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms, Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber, Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation, Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack, Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings, Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas, Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement, Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay, Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation, Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation, Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide), Standard Test Methods for Assay of Organic Peroxides, Standard Test Method for Trace Amounts of Peroxides In Organic Solvents, Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate), Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide), Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure, Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate, Standard Test Methods of Testing Cellulose Acetate, Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method, Standard Test Methods for Sodium Carboxymethylcellulose, Standard Terminology of Cellulose and Cellulose Derivatives, Standard Test Method for Solubility of Cellulose in Sodium Hydroxide, Standard Test Method for Intrinsic Viscosity of Cellulose, Standard Test Methods for Carboxyl Content of Cellulose, Standard Test Methods for Hydroxypropyl Methylcellulose, Standard Test Methods for Hydroxyethylcellulose, Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence, Standard Test Methods for Ashing Cellulose, Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography, Standard Test Method for Dichloromethane-Soluble Matter in Cellulose, Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry, Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography, Standard Test Methods for Hydroxypropylcellulose, Standard Test Method for Carbohydrate Distribution of Cellulosic Materials, Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method, Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall, Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments, Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete, Standard Test Methods for Liquid Paint Driers, Standard Test Methods for Nonvolatile Content of Resin Solutions, Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus, Standard Test Methods for Nonvolatile Content of Varnishes, Standard Guide for Analysis of Electrocoat Bath Samples, Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints, Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints, Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints, Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints, Standard Test Method for Volatile Content of Coatings, Standard Test Method for Pigment Content of Solvent-Reducible Paints, Standard Practice for Separation of Vehicle From Solvent-Reducible Paints, Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method, Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints, Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings, Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging, Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings, Standard Practice for Qualitative Identification of Polymers in Emulsion Paints, Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus, Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy, Standard Test Method for Detection of Lead in Paint and Dried Paint Films, Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy, Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy, Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy, Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing, Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph, Standard Test Method for Iron in Paint Driers by EDTA Method, Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method), Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings, Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus, Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus, Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings, Standard Test Method for Zirconium in Paint Driers by EDTA Method, Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination, Standard Test Method for Vanadium in Paint Driers by EDTA Method, Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method, Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method, Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents, Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus, Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes, Standard Test Method for Determining Whether a Material Is a Liquid or a Solid, Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath, Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths, Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing, Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint, Standard Test Method for Measuring Apparent pH of Electrocoat Baths, Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint, Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography, Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy, Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid, Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement), Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths, Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans, Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints, Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis, Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders, Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography, Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer, Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings, Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement), Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography, Standard Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings, Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography, Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings, Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight, Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating, Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit, Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container, Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them, Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography, Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates, Standard Test Method for Moisture and Residue in Liquid Chlorine, Standard Test Methods for Analysis of Calcium Chloride, Standard Test Method for Mercury in Liquid Chlorine, Standard Test Methods for Chemical Analysis of Sodium Chloride, Standard Test Method for Bromine in Chlorine, Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure), Standard Specification for Liquid Chlorine, Standard Specification for Calcium Hypochlorite, Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities, Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry, Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry, Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates, Standard Test Method for Coating Flexibility of Prepainted Sheet, Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel, Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars, Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence, Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device, Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test, Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel, Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test, Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence, Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome, Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals, Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence, Standard Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine, Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products, Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference, Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates, Standard Guide for Setting Object Color Specifications, Standard Practice for Computing the Colors of Objects by Using the CIE System, Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates, Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials, Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements, Standard Practice for Electronic Interchange of Color and Appearance Data, Standard Practice for Calculation of Weighting Factors for Tristimulus Integration, Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments, Standard Practice for Rectification of Spectrophotometric Bandpass Differences, Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry, Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale, Standard Practice for Specifying Color by the Munsell System, Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System, Standard Practice for Specifying Color by the Natural Colour System (NCS), Standard Practice for Making Cementitious Panels for Testing Coatings, Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments, Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone, Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry, Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens, Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating, Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels, Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens, Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry, Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry, Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing, Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum, Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum, Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces, Standard Specification for Chromates on Aluminum, Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum, Standard Specification for Anodic Oxide Coatings on Aluminum, Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution, Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys, Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications, Standard Specification for Passivation of Stainless Steels Using Electropolishing, Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys, Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces, Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting, Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting, Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting, Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus, Standard Specification for Appearance of Electroplated Plastic Surfaces, Standard Test Method for Peel Strength of Metal Electroplated Plastics, Standard Practice for Rating of Electroplated Panels Subjected to, Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics, Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope, Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities, Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry, Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry, Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters, Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit, Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating, Standard Test Method for Abrasion Resistance of Pipeline Coatings, Standard Test Methods for Cathodic Disbonding of Pipeline Coatings, Standard Test Method for Water Penetration into Pipeline Coatings, Standard Test Method for Specific Bendability of Pipeline Coatings, Standard Practice for Effects of Outdoor Weathering on Pipeline Coatings, Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test), Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test), Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod), Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines, Standard Test Method for Chemical Resistance of Pipeline Coatings, Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures, Standard Test Method for Evaluating Pipeline Coating Patch Materials, Standard Test Methods for Holiday Detection in Pipeline Coatings, Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method), Standard Terminology of Aromatic Hydrocarbons and Related Chemicals, Standard Terminology Relating to Industrial and Specialty Chemicals, Standard Guide for Engineering Chromium Electroplating, Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use, Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates, Standard Specification for Electroplated Engineering Nickel Coatings, Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal, Standard Specification for Electrodeposited Copper for Engineering Uses, Standard Guide for Electroforming with Nickel and Copper, Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use, Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process, Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process, Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding, Standard Specification for Nickel-Cobalt Alloy Coating, Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate, Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces, Standard Test Method for Evaluating Degree of Checking of Exterior Paints, Standard Test Method for Evaluating Degree of Cracking of Exterior Paints, Standard Test Method for Evaluating Degree of Erosion of Exterior Paints, Standard Test Method for Evaluating Degree of Blistering of Paints, Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints, Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments, Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films, Standard Guide for Clear and Pigmented Lacquers, Standard Guide for Soluble Nitrocellulose Base Solutions, Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes, Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers, Standard Test Method for Determining Particle Size of Multicolor Lacquers, Standard Test Method for Chipping Resistance of Coatings, Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products, Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal, Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings, Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions, Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis, Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints, Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions, Standard Test Methods for Volatile Content of Radiation Curable Materials, Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings, Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings, Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings, Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress, Standard Test Method for Print Resistance of Lacquers, Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates, Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products, Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents, Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products, Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus, Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method, Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry, Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data, Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color, Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry, Standard Specification for Light Source Products for Inspection of Fluorescent Coatings, Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source, Standard Test Method for Reflection Haze of High-Gloss Surfaces, Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces, Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials, Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry, Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials, Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers, Standard Practice for Goniometric Optical Scatter Measurements, Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials, Standard Test Method for Multiangle Color Measurement of Interference Pigments, Standard Practice for Sampling and Handling Liquid Cyclic Products, Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride, Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid, Standard Practice for Sampling and Handling Bisphenol A, Standard Practice for Sampling Industrial Chemicals, Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes, Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings, Standard Practice for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars, Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes, Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes, Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes, Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes, Standard Specification for Chemical-Resistant Monolithic Floor Surfacings, Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials, Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings, Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces, Standard Guide for Painting Inspectors (Metal Substrates), Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel, Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers, Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub, Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates, Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives, Standard Practice for Conducting a Patch Test to Assess Coating Compatibility, Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces, Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates, Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs, Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals, Standard Practice for Sampling of Coating Films, Standard Guide for Painting Inspectors (Concrete and Masonry Substrates), Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting, Standard Guide for Testing Industrial Protective Coatings, Standard Practice for Determination of Graffiti Resistance, Standard Test Method for Evaluating Adhesion by Knife, Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings, Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling, Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings, Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument, Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers, Standard Practice for Indicating Oil in Abrasives, Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting, Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty, Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating, Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings, Standard Test Method for the Direct Measurement of Surface Profile of Prepared Concrete, Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination, Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle, Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven, Standard Practices for Preparation of Oil-Based Ink Resin Solutions, Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point), Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer, Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer, Standard Guide for Testing Printing Ink Vehicles and Components Thereof, Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions, Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions, Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer, Standard Terminology for Printing Ink Vehicles and Related Materials, Standard Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles, Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials, Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals, Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration, Standard Test Method for Density or Relative Density of Pure Liquid Chemicals, Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography, Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons, Standard Test Method for Color of Liquids Using Tristimulus Colorimetry, Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration, Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry, Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials, Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor, Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection, Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence, Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection, Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC), Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry, Standard Test Method for pH of Aqueous Solutions With the Glass Electrode, Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals, Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine, Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure), Standard Test Method for Testing Antifouling Panels in Shallow Submergence, Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water, Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater, Standard Guide for Use of Certification of Coating Conformance Form, Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed, Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear, Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water, Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water, Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems, Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating, Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal, Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry, Standard Test Method for Acid Resistance of Porcelain Enamels, Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid, Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel, Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems, Standard Test Method for 45-deg Specular Gloss of Ceramic Materials, Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods), Standard Classification of Water Used in Milling of Porcelain Enamel, Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils, Standard Test Methods for Abrasion Resistance of Porcelain Enamels, Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing, Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage, Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels, Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method, Standard Test Method for Alkali Resistance of Porcelain Enamels, Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling, Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings, Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling, Standard Test Methods for Thickness of Diffusion Coating, Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution, Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum, Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis, Standard Test Method for Continuity of Porcelain Enamel Coatings, Standard Test Method for Cleanability of Surface Finishes, Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing, Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry, Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method, Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces, Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation, Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller, Standard Test Method for Color of Transparent Liquids (Gardner Color Scale), Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements, Standard Test Method for Hiding Power of Paints by Reflectometry, Standard Practice for Selection of Coating Specimens for Appearance Measurements, Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings, Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments, Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings, Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings, Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method, Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale), Standard Specification for Refined Phenol, Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale), Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration, Standard Test Method for Solidification Point of Bisphenol A, Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol), Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography, Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography, Standard Test Method for Iron Content of Bisphenol A (4,4, Standard Test Method for Determination of 4-Carboxybenzaldehyde and, Standard Specification for Purified Terephthalic Acid (PTA), Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration, Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration, Standard Specification for Purified Terephthalic Acid (PTA) with Low, Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration, Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry, Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method, Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry, Standard Test Method for Analysis of Bisphenol A (4,4`-Isopropylidenediphenol) by High Performance Liquid Chromatography, Standard Practice for Preparation of Paint Brushes for Evaluation, Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings, Standard Practice for Physical Characterization of Paint Brushes, Standard Test Method for Evaluation of Cleanability of Paint Brushes, Standard Test Method for Bulk Density of Level Paintbrush Filaments, Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics, Standard Test Method for Bulk Density of Tapered Paintbrush Filaments, Standard Practice for Measuring Curl in Paint Brush Filling Material, Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America, Standard Test Method for Testing Fracture of Level Paintbrush Filaments, Standard Terminology for Paint Brush Application Tools, Standard Terminology for Paint Roller Application Tools, Standard Test Method for Fiber Shedding of Paint Roller Covers, Standard Test Method for Filling Material Shedding of Paint Brushes, Standard Specification for Photoluminescent (Phosphorescent) Safety Markings, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings, Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings, Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels, Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive, Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers, Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings, Standard Test Methods for Indentation Hardness of Organic Coatings, Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings, Standard Test Methods for Water Vapor Transmission of Organic Coating Films, Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker, Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion, Standard Test Method for Tensile Properties of Organic Coatings, Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact), Standard Test Methods for Rating Adhesion by Tape Test, Standard Test Method for Film Hardness by Pencil Test, Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser, Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means, Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests, Standard Practice for Measurement of Wet Film Thickness by Notch Gages, Standard Practice for Preparation of Uniform Free Films of Organic Coatings, Standard Test Method for Mar Resistance of Organic Coatings, Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method, Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders, Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings, Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage, Standard Test Method for Impact Flexibility of Organic Coatings, Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method, Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals, Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching, Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement, Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements, Standard Practice for Estimating Critical Surface Tensions, Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out, Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer, Standard Test Method for Evaluating Degree of Settling of Paint, Standard Test Method for Viscosity by Ford Viscosity Cup, Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage, Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials, Standard Test Method For Density of Liquid Coatings, Inks, and Related Products, Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method, Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method, Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer, Standard Test Method for Viscosity by Dip-Type Viscosity Cups, Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer, Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups, Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings, Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer, Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials, Standard Practice for Incorporating Pigments by High Speed Dispersion, Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers, Standard Test Method for Cone/Plate Viscosity at a 500 s, Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller, Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials, Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature, Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods, Standard Guide for Chemical Analysis of White Pigments, Standard Test Methods of Chemical Analysis of Red Lead, Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese, Standard Specification for Zinc Oxide Pigments, Standard Specification for Basic Carbonate White Lead Pigment, Standard Specification for Red Lead Pigment, Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green, Standard Test Methods for Specific Gravity of Pigments, Standard Test Methods for Coarse Particles in Pigments, Standard Specification for Lampblack Pigment, Standard Specification for Bone Black Pigment, Standard Specification for Chrome Yellow and Chrome Orange Pigments, Standard Specification for Chrome Oxide Green Pigment, Standard Specification for Gold Bronze Powder, Standard Test Methods for Bleeding of Pigments, Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments, Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments, Standard Test Method for Solvent-Extractable Material in Black Pigments, Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow), Standard Classification for Dry Pigmentary Titanium Dioxide Products, Standard Specification for Zinc Yellow (Zinc Chromate) Pigments, Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes, Standard Specification for Zinc Dust Pigment, Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder), Standard Specification for Carbon Black Pigment for Paint, Standard Specification for Barium Sulfate Pigments, Standard Specification for Magnesium Silicate Pigment (Talc), Standard Specification for Wet Ground Mica Pigments, Standard Test Methods for Analysis of Barium Sulfate Pigment, Standard Test Methods for Evaluating Mica Pigment, Standard Test Methods for Analysis of Magnesium Silicate Pigment, Standard Test Methods for Analysis of Aluminum Silicate Pigment, Standard Specification for Raw and Burnt Umber Pigments, Standard Specification for Raw and Burnt Sienna Pigments, Standard Specification for Yellow Iron Oxide Hydrated, Standard Specification for Black Synthetic Iron Oxide, Standard Specification for Aluminum Powder and Paste Pigments for Paints, Standard Specification for Metallic Copper Powder for Use in Antifouling Paints, Standard Test Methods for Chemical Analysis of Blue Pigments, Standard Specification for Calcium Carbonate Pigments, Standard Test Methods for Common Properties of Certain Pigments, Standard Test Methods for Chemical Analysis of White Lead Pigments, Standard Practice for Reporting Particle Size Characteristics of Pigments, Standard Test Methods for Chemical Analysis of White Titanium Pigments, Standard Specification for Basic Lead Silicochromate Pigment, Standard Specification for Strontium Chromate Pigment, Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate, Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment, Standard Specification for Molybdate Orange Pigments, Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment, Standard Specification for Phthalocyanine Green Pigments, Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments, Standard Test Methods for Analysis of White Zinc Pigments, Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction, Standard Specification for Synthetic Red Iron Oxide Pigment, Standard Specification for Natural Red and Brown Iron Oxide Pigments, Standard Specification for Synthetic Brown Iron Oxide Pigment, Standard Test Method for Ferrous Iron in Iron Oxides, Standard Test Methods for Percent Solids in Titanium Dioxide Slurries, Standard Guide for Determining Volatile and Nonvolatile Content of Pigments, Standard Specification for Calcium Borosilicate Pigments, Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment, Standard Specification for Zinc Hydroxy Phosphite Pigment, Standard Test Methods for Analysis of Calcium Borosilicate, Standard Specification for Zinc Phosphate Pigments, Standard Test Methods of Sampling and Testing Turpentine, Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives, Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products, Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products, Standard Test Methods of Sampling and Grading Rosin, Standard Test Methods for Sampling and Testing Dipentene, Standard Test Methods for Sampling and Testing Pine Oils, Standard Test Methods for Testing Tall Oil, Standard Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products, Standard Test Method for Volatile Oil in Rosin, Standard Test Method for Water in Liquid Pine Chemicals, Standard Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products, Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products, Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products, Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids, Standard Test Method for Titer of Fatty Acids, Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids, Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography, Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method), Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color), Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures, Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography, Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus, Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography, Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry, Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating, Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus, Standard Specification for Shellac Varnishes, Standard Test Method for Epoxy Content of Epoxy Resins, Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method, Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins, Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method, Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles, Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers, Standard Guide for Testing Latex Vehicles, Standard Test Method for Total Chlorine in Epoxy Resins and Compounds, Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins, Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography, Standard Test Method for Corner Coverage of Powder Coatings, Standard Guide for Testing Coating Powders and Powder Coatings, Standard Test Method for Gel Time of Thermosetting Coating Powder, Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders, Standard Guide to Evaluation of Optical Properties of Powder Coatings, Standard Guide for Significance of Particle Size Measurements of Coating Powders, Standard Test Methods for Density of Coating Powders, Standard Test Methods for Measuring the Hiding Power of Powder Coatings, Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness, Standard Practice for Preparation of Low-Carbon Steel for Electroplating, Standard Guide for Preparation of High-Carbon Steel for Electroplating, Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings, Standard Guide for Preparation of Aluminum Alloys for Electroplating, Standard Practice for Preparation of and Electroplating on Stainless Steel, Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings, Standard Guide for Preparation of Lead and Lead Alloys for Electroplating, Standard Practice for Preparation of Iron Castings for Electroplating, Standard Guide for Cleaning Metals Prior to Electroplating, Standard Practice for Preparation of Nickel for Electroplating with Nickel, Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating, Standard Practice for Preparation of Titanium and Titanium Alloys, Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating, Standard Practice for Preparation of Nickel Alloys for Electroplating, Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating, Standard Practice for Preparation of Chromium for Electroplating with Chromium, Standard Practice for Preparation of Plastics Materials for Electroplating, Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement, Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement, Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish, Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses, Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use, Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use, Standard Specification for Electrodeposited Coatings of Silver for Engineering Use, Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use, Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer, Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions, Standard Test Method for Coarse Particles in Printing Ink Dispersions, Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer, Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems, Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer, Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester, Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance, Standard Test Method for Relative Setting of Heatset Printing Inks, Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks, Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press, Standard Terminology Relating to Print Problems, Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement, Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique, Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage, Standard Terminology for Printing Inks, Materials, and Processes, Standard Test Method for Relative Mileage of News Ink on Newsprint, Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings, Standard Test Method for Reflection Density of Printed Matter, Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester, Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method, Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants, Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application, Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems, Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems, Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems, Standard Practice for Installation of Vulcanized Rubber Linings, Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials, Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method, Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities, Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities, Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants, Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities, Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist, Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant, Standard Guide for Qualification Testing of Coatings Used in Coating Service Level I in Nuclear Power Plants, Standard Test Method for Retroreflectance of Horizontal Coatings, Standard Practice for Describing Retroreflection, Standard Practice for Measuring Photometric Characteristics of Retroreflectors, Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry, Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions, Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer, Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle, Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer, Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R, Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer, Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter, Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle, Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (R, Standard Test Method for Nighttime Retroreflected Chromaticity of Retroreflective Sheeting, Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions, Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants, Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants, Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants, Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants, Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates, Standard Guide for Determining Coating Qualification Test Data Applicability, Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys, Standard Specification for Electrodeposited Coatings of Tin, Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate), Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel, Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited, Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel, Standard Specification for Coatings of Cadmium Mechanically Deposited, Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel, Standard Specification for Electrodeposited Coatings of Cadmium, Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited, Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits, Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits, Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits, Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent), Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material, Standard Specification for 2-Butoxyethanol, Standard Specification for 2-Ethoxyethanol, Standard Specification for Liquid Paint Driers, Standard Specification for Dibutyl Phthalate, Standard Specification for Methyl Ethyl Ketone, Standard Specification for Isopropyl Alcohol, Standard Test Method for Distillation Range of Volatile Organic Liquids, Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents, Standard Specification for Methanol (Methyl Alcohol), Standard Specification for Methyl Isobutyl Ketone, Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale), Standard Specification for High-Gravity Glycerin, Standard Test Method for Odor of Volatile Solvents and Diluents, Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products, Standard Test Method for Permanganate Time of Acetone and Methanol, Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method), Standard Test Method for Heptane Miscibility of Lacquer Solvents, Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products, Standard Test Method for Alkalinity in Acetone, Standard Test Method for Ester Value of Solvents and Thinners, Standard Specification for Isobutyl Acetate (95 % Grade), Standard Specification for Isobutyl Alcohol, Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions, Standard Test Method for Water Miscibility of Water-Soluble Solvents, Standard Specification for Commercial Hexanes, Standard Specification for 2-Ethylhexanol, Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde, Standard Test Method for Iron in Formaldehyde Solutions, Standard Specification for Vinyl Acetate, Standard Test Method for Acetaldehyde Content of Vinyl Acetate, Standard Test Method for Purity of Aldehydes and Ketones, Standard Test Method for Hydroquinone in Vinyl Acetate, Standard Test Method for Concentration of Formaldehyde Solutions, Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited, Standard Test Method for Acidity of Formaldehyde Solutions, Standard Test Method for Methanol Content of Formaldehyde Solutions, Standard Specification for Diacetone Alcohol, Standard Specification for Methyl Amyl Acetate (95 % Grade), Standard Specification for Methyl Isobutyl Carbinol, Standard Specification for Hexylene Glycol, Standard Specification for Ethylene Glycol, Standard Specification for Diethylene Glycol, Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography, Standard Specification for Methyl Isoamyl Ketone, Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid, Standard Specification for 2-Methoxyethanol, Standard Specification for Isopropyl Acetate (99 % Grade), Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography, Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography, Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade), Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography, Standard Test Method for Formic Acid in Glacial Acetic Acid, Standard Specification for Ethyl Acrylate, Standard Specification for Glacial Acetic Acid, Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade), Standard Specification for High-Flash Aromatic Naphthas, Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography, Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography, Standard Specification for Ethyl Acetate (All Grades), Standard Specification for n-Butyl Acetate (All Grades), Standard Specification for Methyl Acrylate, Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate, Standard Specification for Propylene Glycol Monomethyl Ether Acetate, Standard Specification for Dipropylene Glycol Monomethyl Ether, Standard Specification for Propylene Glycol Monomethyl Ether, Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography, Standard Specification for Hexyl Acetate, Standard Specification for Propylene Glycol and Dipropylene Glycol, Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography, Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography, Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography, Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries, Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation, Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry, Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry, Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry, Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry, Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers, Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands, Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials, Standard Test Method for Aldehydes in Styrene Monomer, Standard Test Methods for Polymer Content of Styrene Monomer, Standard Test Method for Evaporating Residue of Naphthalene, Standard Test Method for Peroxides in Styrene Monomer, Standard Specification for Styrene Monomer, Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene), Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography, Standard Specification for Cumene (Isopropylbenzene), Standard Test Method for Colorimetric Determination of, Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography, Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography, Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography, Standard Specification for AMS (α-Methylstyrene), Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard), Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process, Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration, Standard Test Methods for Polymer Content of AMS (α-Methylstyrene), Standard Terminology for Paint, Related Coatings, Materials, and Applications, Standard Terminology Relating to Hydrocarbon Resins, Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments, Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test), Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure, Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section, Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals, Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits, Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals, Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method, Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates, Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test, Standard Guide for Measurement of Thin Chromium Coatings by Spot Test, Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method, Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry, Standard Practice for Qualitative Adhesion Testing of Metallic Coatings, Standard Test Method for Microhardness of Electroplated Coatings, Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings, Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer, Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings, Standard Test Method for Solderability of Metallic-Coated Products, Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings, Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope, Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings, Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test), Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings, Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures, Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”), Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method, Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion, Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method, Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test, Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method), Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test), Standard Test Method for No-Pick-Up Time of Traffic Paint, Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials, Standard Practice for Determination of Degree of Bleeding of Traffic Paint, Standard Practice for Evaluating Degree of Pavement Marking Line Wear, Standard Test Method for Roundness of Glass Spheres, Standard Test Method for Sieve Analysis of Glass Spheres, Standard Guide for Selection of Tests for Traffic Paints, Standard Practice for Solvent and Fuel Resistance of Traffic Paint, Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials, Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking, Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials, Standard Practice for Sampling of Thermoplastic Traffic Marking Materials, Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials, Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet, Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device, Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints, Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer, Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures, Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer, Standard Practice for Representative Field Sampling of Traffic Paints, Standard Test Method for Un-notched Cantilever Beam Impact Resistance (Izod Impact) Testing of Thermoplastic Pavement Marking Materials, Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight, Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit, Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials, Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale, Standard Practice for Establishing Color and Gloss Tolerances, Standard Practice for Visual Evaluation of Metamerism, Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance, Standard Practice for Visual Color Evaluation of Transparent Sheet Materials, Standard Guide for Selection, Evaluation, and Training of Observers, Standard Guide for Designing and Conducting Visual Experiments.
copy of the standards you need. document.getElementById("button").onclick = function () { An economic evaluation of the initial cost as compared to future maintenance cost. Smith, E.F. Ball, and P.J. Get Standards Using the Privacy Shield (required): By checking this box, I understand that all data collected by SSPC is stored in the United States. Browse all paint and coatings standards.

Foehl, 1954, "Shop Paint and Painting Practice," Proceedings of AISC National Engineering Conference, Milwaukee, WI, AISC, Chicago, IL. 10.1.4. Therefore, fabricated structural steel is left unpainted unless painting requirements are outlined in the contract documents. The coupon code has been applied to your cart! This directory of standards, recommended practices, and test methods from coatings-relevant Search Standards | Paint coating processes. All consumers benefit from the use of PCA Standards by those they contract with, to provide best value for their painting and decorating expenditures. Paint and Coating Testing Manual ... of Standards remaining the primary source of such informa-tion. NEW Download Tool –>. Protect… What paint system is implied by the general requirement of a "shop coat" or "paint"?

Bands With Earth In The Name, Home Hardware Helensburgh, Orange County Circuit Judge Candidates 2020, Dewalt Dpg17 How To Pair, Por Or Para For Cost, Best Carnitas Recipe, Sicilienne Flute Grade, Por Or Para For Cost, Star Trek Face Of The Unknown, Yu-gi-oh! Ignition Assault Booster Box, 85 Inch Sectional Sofa With Chaise, H Nmr Spectrum, Vanadium Stock Price, Residential Construction Academy: Carpentry Pdf, Viola Sheet Music Easy, Osceola County Jail Ptr, Tener Worksheet Doc, Dulcimer Meaning In Urdu, Brinjal Png Image, Medium Firm Mattress Topper, Science And Technology Essay In Tamil, Swear Word Alternatives, The Line Buffet Menu,